 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
|
|
Failure to follow all safety guidelines prescribed in this document and by governing authorities and regulatory agencies may result in severe injury or death of personnel or machine damage. |
|
|
Do not operate any control lever until certain that all personnel are clear of any machine movement, even if the pump motor is not running. Personnel may be seriously injured or killed if struck by a moving machine or machine component. |
This story includes the following test:
- Travel Test
- Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.
- Permit only one operator on the machine. Keep all other personnel away from the machine or in the operator sight.
- Place the machine in the PARK position.
- Engage the parking brake.
- Put the machine in travel mode.
Note: An audible alarm should sound when put into travel mode.
- With all travel interlocks released, move the machine in forward and reverse directions.
- Slowly engage the joysticks.
Note: The machine should move slowly in proportion to the joystick output.
Note: The machine should travel straight.
- Fully stroke the joysticks in both directions.
Note: A slight pull to the left (non-cab) side may be noticed as the machine jumps. Travel should be straight thereafter.
- Carefully let off the joystick to observe the responsiveness of the pump controls. The pumps should spike naturally, but also drain down smoothly and responsively.