D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Caterpillar


Drive Line Wear Sleeve - Inspect/Replace - MTL Only

Usage:

246D3 AH6


Illustration 1g06040640
(1) Wear Sleeve
(2) Friction Tape
(3) Tie Strap

  1. Cut both tie straps and remove the worn wear sleeve.

  2. Install a new wear sleeve onto the hose in the same location. Use the grip tape on the hose as a guide. Replace the grip tape as needed. The sleeve should fall where the hose assembly makes contact with metal frame members or other hoses.

  3. Secure the wear sleeve using two tie straps.

Caterpillar Information System:

Installation of Counterweight and Ground Level Service Center on Certain D11 Track-Type Tractors {1408, 7056, 7153} Installation of Counterweight and Ground Level Service Center on Certain D11 Track-Type Tractors {1408, 7056, 7153}
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Caterpillar Approved Work Tools
MD6250 Rotary Drill Systems Counterbalance Valve - Test and Adjust - Mast Raise
PL61 Pipelayers Engine Supplement Oil Cooler (Engine) - Remove and Install
Exhaust Cooler (NRS) on Certain C7.1 and C6.6 Machine Engines {1061, 1087, 108C} Exhaust Cooler (NRS) on Certain C7.1 and C6.6 Machine Engines {1061, 1087, 108C}
D6 Track-Type Tractor Electrohydraulic Systems Diagnostic Trouble Codes
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Air Inlet and Exhaust System Operation
New Troubleshooting Procedure for the Low Steering Pilot Pressure Code Is Now Used for Certain 854K Wheel Dozers and 992K Wheel Loaders {0732, 4300, 4306, 5070, 5073} New Troubleshooting Procedure for the Low Steering Pilot Pressure Code Is Now Used for Certain 854K Wheel Dozers and 992K Wheel Loaders {0732, 4300, 4306, 5070, 5073}
MD6250 Rotary Drill Systems Rotary Head - Test and Adjust
MD6250 Rotary Drill Systems Travel System - Test and Adjust
MD6250 Rotary Drill Systems Mast - Test and Adjust
MD6250 Rotary Drill Systems Leveling System - Test and Adjust
D9R Track-Type Tractor Power Train Torque Divider - Disassemble
New Improved Grapple Bucket Pins for Small Wheel Loaders {6101} New Improved Grapple Bucket Pins for Small Wheel Loaders {6101}
C7.1 Engines SCR Catalyst Has Incorrect Inlet Temperature
D9T Track-Type Tractor Machine Systems Battery and Wiring Group
PL61 Pipelayers Engine Supplement Fuel Filter and Base - Remove and Install
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Belts - Inspect/Adjust
374 Excavator Declaration of Conformity
D6 Track-Type Tractor Electrohydraulic Systems Event Codes
374 Excavator Lifting Capacities
374 Excavator Specifications
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Belts - Replace
374 Excavator Boom/Stick/Bucket Combinations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.