D9T Track-Type Tractor Machine Systems Caterpillar


Battery and Wiring Group

Usage:

D9T NJH


Illustration 1g06387366

Table 1
Item  Qty  Part  Specification Description 
355-3148 Pressure Switch  Torque to 18.0 ± 1.5 N·m (159.3 ± 13.3 lb in)
149-6371 Pressure Switch  Torque to 18.0 ± 1.5 N·m (159.3 ± 13.3 lb in)


Illustration 2g06387751
Right side view of machine

Table 2
Item  Qty  Part  Specification Description 
430-9455 Liquid Level Sensor Gp  Torque to 22 ± 3 N·m (195 ± 27 lb in)


Illustration 3g06387759
Top view of machine

Table 3
Item  Qty  Part  Specification Description 
15  3K-6060 Locknut  Torque to 12 ± 5 N·m (106 ± 44 lb in)
256-6453 Temperature Sensor  Torque to 20 ± 3 N·m (177 ± 27 lb in)
430-9453 Liquid Level Sensor Gp  Torque to 18 ± 2 N·m (159 ± 18 lb in)

Caterpillar Information System:

C7.1 Engines SCR Catalyst Has Incorrect Inlet Temperature
New Improved Grapple Bucket Pins for Small Wheel Loaders {6101} New Improved Grapple Bucket Pins for Small Wheel Loaders {6101}
D9R Track-Type Tractor Power Train Torque Divider - Disassemble
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Drive Line Wear Sleeve - Inspect/Replace - MTL Only
Installation of Counterweight and Ground Level Service Center on Certain D11 Track-Type Tractors {1408, 7056, 7153} Installation of Counterweight and Ground Level Service Center on Certain D11 Track-Type Tractors {1408, 7056, 7153}
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Caterpillar Approved Work Tools
MD6250 Rotary Drill Systems Counterbalance Valve - Test and Adjust - Mast Raise
PL61 Pipelayers Engine Supplement Oil Cooler (Engine) - Remove and Install
Exhaust Cooler (NRS) on Certain C7.1 and C6.6 Machine Engines {1061, 1087, 108C} Exhaust Cooler (NRS) on Certain C7.1 and C6.6 Machine Engines {1061, 1087, 108C}
D6 Track-Type Tractor Electrohydraulic Systems Diagnostic Trouble Codes
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Air Inlet and Exhaust System Operation
New Troubleshooting Procedure for the Low Steering Pilot Pressure Code Is Now Used for Certain 854K Wheel Dozers and 992K Wheel Loaders {0732, 4300, 4306, 5070, 5073} New Troubleshooting Procedure for the Low Steering Pilot Pressure Code Is Now Used for Certain 854K Wheel Dozers and 992K Wheel Loaders {0732, 4300, 4306, 5070, 5073}
PL61 Pipelayers Engine Supplement Fuel Filter and Base - Remove and Install
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Belts - Inspect/Adjust
374 Excavator Declaration of Conformity
D6 Track-Type Tractor Electrohydraulic Systems Event Codes
374 Excavator Lifting Capacities
374 Excavator Specifications
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Belts - Replace
374 Excavator Boom/Stick/Bucket Combinations
Improved Guard Rail Assembly is Now Used on Certain MD6250 and MD6310 Rotary Drills {7150, 7256} Improved Guard Rail Assembly is Now Used on Certain MD6250 and MD6310 Rotary Drills {7150, 7256}
S60, S70 and S80 Quick Couplers Coupler Cylinder - Remove and Install
S60, S70 and S80 Quick Couplers Quick Coupler Lock - Remove and Install
C7.1 Engines Crankcase Breather Ejects Oil
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.