D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Caterpillar

Note: Do not use a Cat work tool on a machine that is not approved by Cat.

Note: A Debris Barrier Kit is required for use in applications which create airborne debris. Consult your Cat dealer for information about this kit.

Use of the following equipment or operation in the following applications may create airborne debris:

• mulching head

• brush cutter

• hammers

• recycling of paper products certain agriculture applications

• cold planing

Note: See your Cat dealer for work tools and for work tool attachments that are approved for roading.

Note: The combination of Water Tank, Backhoe Loader, and Hydraulic Hammer exceeds the recommended load rating.

Legend

C - Compatible

C* - Compatible But Lift Restriction Apply

C^ - Compatible But Lift Restrictions Apply and Max Machine Counterweights Required

D - European Union Restrictions Apply; Refer to Operation Maintenance Manual, "Safety Section: Worktools: Demolition"

R - Machine must have limited options installed to avoid exceeding the maximum total machine rated capacity. Refer to the Operation and Maintenance Manual for the specific Work Tool for details.

Many of the work tools in the table have an Operation and Maintenance Manual. Refer to the Operation and Maintenance Manual that is provided with the work tool for the proper use of the work tool.

Consult your Cat dealer concerning specific work tools that are approved by Cat for this machine. This list was complete at the time of publication. There may be more work tools that have been approved since that time. Consult your Cat dealer for an updated list of approved work tools.

INTENDED USE STATEMENT for the Material Handling Arm

This Work Tool has the intended functions of lifting and transporting suspended loads. Always select sufficiently sized lifting accessories. Always inspect the lifting accessories before use.

Do not use the work tool improperly.

Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.

INTENDED USE STATEMENT for the Multipurpose Bucket

This Work Tool has the intended functions of dozing, digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel.

Do not use the work tool improperly.

Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.

INTENDED USE STATEMENT for the Grapple Bucket

This Work Tool has the intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock, gravel, or debris.

Do not use the work tool improperly.

Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.

INTENDED USE STATEMENT for the Grapple Rake

This Work Tool has the intended functions of raking, loading, carrying, and moving bulky material. The material may be encountered in the following applications:

• Landscape cleanup

• Storm debris cleanup

• Demolition

• Industrial

• Construction

Do not use the work tool improperly.

• Do not pry with one rake tine. Use multiple rake tines to loosen material.

• Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.

• Do not place the weight of the host machine on the grapples in the open position.

INTENDED USE STATEMENT for the Grapple Forks

This Work Tool has the intended functions of loading, carrying, and moving bulky materials.

Do not use the work tool improperly.

Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.