New Engine Software is Now Available for Certain Track-Type Tractor Engines {1902, 1920, 7610, 7620}
- Track-Type Tractor
- D10T (S/N: RJG1-UP)
- D11T (S/N: GEB1-UP; TPB1-UP)
The new engine software resolves compatibility issues between the engine, VIMS, Guardian, and Command for Dozing.
The table below contains the new and previous software part numbers.
Show/hide table
New Software Part Number | Part Name | Previous Software Part Number |
---|---|---|
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software |
The new software is available in the form of a flashfile through the Caterpillar® Service Information System (SIS). A newer part number may be available. SIS Web only displays the latest available flashfile.
Caterpillar Information System:
D8T and D9T Track-Type Tractors ECM - Configure
PL61 Pipelayers Engine Supplement Engine Oil Filter and Base - Remove and Install
Compatibility of The Bulldozer Arrangement, Rear Attachments, and Final Drive Guards of D6T Track-Type Tractors {5163, 6050, 6060, 6310, 7000, 7056} Compatibility of The Bulldozer Arrangement, Rear Attachments, and Final Drive Guards of D6T Track-Type Tractors {5163, 6050, 6060, 6310, 7000, 7056}
D6 Track-Type Tractor Machine Systems Steering Oil Filter and Base - Remove and Install
D6 Track-Type Tractor Machine Systems Bulldozer Lift Cylinder Mounts - Remove and Install
D11 Track-Type Tractor Sound Information and Vibration Information
PL61 Pipelayers Engine Supplement Muffler - Remove and Install
PL61 Pipelayers Engine Supplement Crankshaft Pulley - Remove and Install
D6 Track-Type Tractor Machine Systems Control (Joystick) - Remove and Install
340 Excavator Boom/Stick/Bucket Combinations
340 Excavator Specifications
PL61 Pipelayers Engine Supplement Turbocharger - Remove and Install
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Model View Illustrations
MD6250 Rotary Drill Systems Leveling System - Test and Adjust
MD6250 Rotary Drill Systems Mast - Test and Adjust
MD6250 Rotary Drill Systems Travel System - Test and Adjust
MD6250 Rotary Drill Systems Rotary Head - Test and Adjust
New Troubleshooting Procedure for the Low Steering Pilot Pressure Code Is Now Used for Certain 854K Wheel Dozers and 992K Wheel Loaders {0732, 4300, 4306, 5070, 5073} New Troubleshooting Procedure for the Low Steering Pilot Pressure Code Is Now Used for Certain 854K Wheel Dozers and 992K Wheel Loaders {0732, 4300, 4306, 5070, 5073}
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Air Inlet and Exhaust System Operation
D6 Track-Type Tractor Electrohydraulic Systems Diagnostic Trouble Codes
Exhaust Cooler (NRS) on Certain C7.1 and C6.6 Machine Engines {1061, 1087, 108C} Exhaust Cooler (NRS) on Certain C7.1 and C6.6 Machine Engines {1061, 1087, 108C}
PL61 Pipelayers Engine Supplement Oil Cooler (Engine) - Remove and Install
MD6250 Rotary Drill Systems Counterbalance Valve - Test and Adjust - Mast Raise
D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Caterpillar Approved Work Tools