Fuel System Water Separator - Drain
Show/hide table
| |
| Illustration 1 | g00668636 |
|
(1) Bowl
(2) Element (3) Drain | |
Bowl (1) should be monitored daily for signs of water. If water is present, drain the water from the bowl.
- Open drain (3). The drain is a self-ventilated drain. Catch the draining water in a suitable container. Dispose of the water properly.
- Close drain (3).
Show/hide table
| NOTICE |
|---|
|
The water separator is under suction during normal engine operation. Ensure that the drain valve is tightened securely to help prevent air from entering the fuel system. |
Caterpillar Information System:
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
C27 and C32 Generator Set Engines Vibration Damper and Pulley
C32 Marine and Auxiliary Marine Engines Valve Mechanism Cover - Remove and Install
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Muffler - Remove and Install
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Remove
C13 Engine for Combat and Tactical Vehicles Engine Design
C-12 Generator Set Engine CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
G3408C and G3412C Engines Inlet and Exhaust Valve Guides - Remove and Install - New Taller Head
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 05
C32 Marine and Auxiliary Marine Engines Housing (Front) - Install
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C32 Marine Engines Rocker Arm and Shaft - Remove
C9-XQ300 Rental Generator Set Engine Speed/Timing Sensors - Check/Clean/Calibrate
C32 Marine Engines Rocker Arm and Shaft - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
C11 and C13 On-Highway Engines Turbocharger
C11 and C13 On-Highway Engines Air Lines
C27 and C32 Generator Set Engines Flywheel
C11 and C13 On-Highway Engines Camshaft
C15 Petroleum Generator Set Engines Alternator and Regulator
2005/08/15 New Bolt Available to Secure Generator Flex-Plate to Generator Rotor Shaft {3252}