New Bolt Available to Secure Generator Flex-Plate to Generator Rotor Shaft {3252}
- Engine:
- 3412 (S/N: 4BZ7545-7550,7558,7560,7562,7564-7572,7574-7575,7577-7581,7583,7585,7591-7592,7594-7607,7617,7620-7621,7623-7625,7627-7632,7641-UP)
- Power Module:
- PM3412 (S/N: CAJ159-UP)
- 3412C (S/N: BCW916-918,924,926,928-UP; DJN561,587,593,596-597,599-UP; TFT339-UP; 9EP3514,3517,3523-3525,3528-3529,3532-3536,3538-UP)
- G3412 (S/N: KAP345-UP; R7A107-UP)
Description of Change: New bolts are now available to secure the generator flex-plate to the generator rotor shaft on all 590 Series frame generators. These new hex head bolts will have increased reliability over the former twelve-point bolts.
Adaptable To: The new 8T-9400 Bolts are direct replacements for the former 9X-2119 Bolts used on all 590 Series frame generators.
Caterpillar Information System:
C15 Petroleum Generator Set Engines Alternator and Regulator
C11 and C13 On-Highway Engines Camshaft
C27 and C32 Generator Set Engines Flywheel
C11 and C13 On-Highway Engines Air Lines
C11 and C13 On-Highway Engines Turbocharger
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
C32 Marine Engines Rocker Arm and Shaft - Install
C9-XQ300 Rental Generator Set Engine Speed/Timing Sensors - Check/Clean/Calibrate
C32 Marine Engines Rocker Arm and Shaft - Remove
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
3412E and C30 Marine Engines Fuel System Water Separator - Drain
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
3126B Generator Set Engine Diagnostic Codes
2005/08/29 A New O-Ring Seal is Now Available for the Crankcase Breather {1317}
C11 and C13 Industrial Engines Engine Oil Filter Base
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Remove
C11 and C13 On-Highway Engines Engine Oil Cooler
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0707 - FMI 05
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0707 - FMI 06
2005/12/01 Improved Valve Springs are Now Used {1100, 1108}
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0708 - FMI 03
3126B Generator Set Engine Event Codes
C27 and C32 Generator Sets Product Lifting