CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
Conditions Which Generate This Code:
The voltage level of the 5 volt supply is below normal.
System Response:
The Electronic Control Module (ECM) will log the diagnostic code. The current to the injection actuation pressure control valve is set to 40 percent. The ECM sets all of the 5 volt sensors to default values.
Low power
Test Step 1. Perform the following diagnostic procedure: Analog Sensor Supply Circuit - Test
Results:
- OK - STOP
Caterpillar Information System:
G3408C and G3412C Engines Inlet and Exhaust Valve Guides - Remove and Install - New Taller Head
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 05
C32 Marine and Auxiliary Marine Engines Housing (Front) - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1743 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 08
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 03
C32 Marine and Auxiliary Marine Engines Housing (Front) - Remove
C-12 Generator Set Engine CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 Generator Sets Cold Weather Starting
C9-XQ300 Rental Generator Set Fuel Related Components in Cold Weather
C9-XQ300 Rental Generator Set Before Towing
C13 Engine for Combat and Tactical Vehicles Engine Design
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Muffler - Remove and Install
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Install
C32 Marine and Auxiliary Marine Engines Valve Mechanism Cover - Remove and Install
C27 and C32 Generator Set Engines Vibration Damper and Pulley
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 06
3412E and C30 Marine Engines Fuel System Water Separator - Drain
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C32 Marine Engines Rocker Arm and Shaft - Remove