CID 1743 FMI 02
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects a combination of switch positions for the mode switches that has not been defined.
System Response:
The ECM will return the engine to the last good mode selection or setting.
The engine will start and the engine will default to the previous mode selection. The engine may operate at reduced speed or reduced power. This will depend on the mode that is selected.
Test Step 1. Perform the following diagnostic procedure: Mode Selection Circuit - Test
Results:
- OK - STOP
Caterpillar Information System:
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 08
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 03
C32 Marine and Auxiliary Marine Engines Housing (Front) - Remove
C-12 Generator Set Engine CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 Generator Sets Cold Weather Starting
C9-XQ300 Rental Generator Set Fuel Related Components in Cold Weather
C9-XQ300 Rental Generator Set Before Towing
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Electric Starting Motor - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0707 - FMI 03
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 02
C32 Marine Engines Crankshaft Front Seal - Install
C32 Marine and Auxiliary Marine Engines Housing (Front) - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 05
G3408C and G3412C Engines Inlet and Exhaust Valve Guides - Remove and Install - New Taller Head
C-12 Generator Set Engine CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C13 Engine for Combat and Tactical Vehicles Engine Design
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Muffler - Remove and Install
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Install
C32 Marine and Auxiliary Marine Engines Valve Mechanism Cover - Remove and Install
C27 and C32 Generator Set Engines Vibration Damper and Pulley
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 06