Muffler - Remove and Install
拆卸步骤
Show/hide table
高温发动机部件可能导致灼伤。 进行发动机保养之前让发动机和部件冷却下来。 |
- 打开发动机检修门. 将适当的起吊设备连接在发动机罩 (1) 上。 发动机罩 (1) 的重量约为 57 kg (125 lb)。 拆下发动机罩 (1) 。
Show/hide table
图 1 | g01188380 |
- 拆下卡箍 (2) 。
Show/hide table
图 2 | g01188381 |
- 松开卡箍 (3) 。 将排气管 (4) 移入消音器 (5) 中。
Show/hide table
图 3 | g01188383 |
- 断开排放管 (6) 。
Show/hide table
图 4 | g01188385 |
- 将合适的起吊设备连接到消音器 (5) 上。 消音器 (5) 的重量约为 43 kg (95 lb)。 拆下 U 形螺栓 (7) 。 拆下消音器 (5) 。
Show/hide table
图 5 | g01188388 |
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 5P-3931     | 防粘结剂     | 1     |
- 将合适的起吊设备连接到消音器 (5) 上。 消音器 (5) 的重量约为 43 kg (95 lb)。 安装消音器 (5) 。 工具 (A) 用于安装U形螺栓 (7) 。 安装 U 形螺栓 (7) 。
Show/hide table
图 6 | g01188388 |
- 连接排放管 (6) 。
Show/hide table
图 7 | g01188385 |
- 将排气管 (4) 从消音器 (5) 移出。 拧紧卡箍 (3) 。
Show/hide table
图 8 | g01188383 |
- 安装卡箍 (2) 。
Show/hide table
图 9 | g01188381 |
- . 将适当的起吊设备连接在发动机罩 (1) 上。 发动机罩 (1) 的重量约为 57 kg (125 lb)。 安装发动机罩 (1) 。 关闭发动机检修门。
Show/hide table
图 10 | g01188380 |
Caterpillar Information System:
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Remove
C13 Engine for Combat and Tactical Vehicles Engine Design
C-12 Generator Set Engine CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
G3408C and G3412C Engines Inlet and Exhaust Valve Guides - Remove and Install - New Taller Head
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 05
C32 Marine and Auxiliary Marine Engines Housing (Front) - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1743 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 08
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 03
C32 Marine and Auxiliary Marine Engines Housing (Front) - Remove
C-12 Generator Set Engine CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C32 Marine and Auxiliary Marine Engines Housing (Rear) - Install
C32 Marine and Auxiliary Marine Engines Valve Mechanism Cover - Remove and Install
C27 and C32 Generator Set Engines Vibration Damper and Pulley
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 06
3412E and C30 Marine Engines Fuel System Water Separator - Drain
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C32 Marine Engines Rocker Arm and Shaft - Remove
C9-XQ300 Rental Generator Set Engine Speed/Timing Sensors - Check/Clean/Calibrate
C32 Marine Engines Rocker Arm and Shaft - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install