Inlet Manifold - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove the air inlet elbow from inlet manifold (5) .
Show/hide table
Illustration 1 | g01176262 |
- Disconnect harness assembly (2) and harness assembly (3) .
- Disconnect hose assembly (4) from inlet manifold (5) .
- Remove bolts (1) and bolts (6) .
- Remove inlet manifold (5) and the O-ring seals.
Caterpillar Information System:
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C-10 Petroleum Engine Exhaust Manifold - Remove and Install
C-10 Petroleum Engine Turbocharger - Install
C9 Engine for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger - Assemble
C-10 Petroleum Engine Turbocharger - Disassemble
C-10 Petroleum Engine Turbocharger - Remove
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Install
C9 Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
3500 Locomotive Engines Air Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Generator Set Engines Fuel Shutoff
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C-10 Petroleum Engine Inlet Manifold - Install
3500 Engines with EUI Option Turbocharger
2005/07/04 Improved Fuel Cooler {1712}
C15 On-Highway Engine Engine Design
C9 Engine for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Generator Set Sensors and Electrical Components