Exhaust Manifold - Remove and Install
Removal Procedure
Start By:
- Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
- Remove the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Remove".
- Disconnect hose (1) and hose assembly (2) .
Show/hide table
Illustration 1 | g01175879 |
- Remove bolts (3) .
- Remove exhaust manifold (4) and the gaskets.
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-3931     | Anti-Seize Compound     | 1     |
- Inspect the condition of the gaskets. Replace the gaskets, if necessary.
- Position the gaskets and exhaust manifold (4) on the cylinder head.
Show/hide table
Illustration 2 | g01175879 |
Show/hide table
Illustration 3 | g01175967 |
- Apply Tooling (A) to bolts (3). Install bolts (3) and tighten in a numerical sequence.
- Connect hose assembly (2) and hose (1) .
End By:
- Install the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Install".
- Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar Information System:
C-10 Petroleum Engine Turbocharger - Install
C9 Engine for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger - Assemble
C-10 Petroleum Engine Turbocharger - Disassemble
C-10 Petroleum Engine Turbocharger - Remove
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Install
C9 Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
XQ60 Rental Generator Set Product Lifting
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
C9 Engine for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
325D and 329D Excavators Hydraulic System Solenoid Valve (Hydraulic Lockout)
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
3500 Locomotive Engines Air Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Generator Set Engines Fuel Shutoff
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C-10 Petroleum Engine Inlet Manifold - Install