Inlet Air Temperature Sensor - Remove and Install
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从进气温度传感器 (2) 上断开线束组件 (1)。
- 拆下进气温度传感器 (2)。 从进气温度传感器 (2) 上拆下 O 形密封圈。
Show/hide table
| |
| 图 1 | g01175809 |
- 在进气温度传感器 (2) 上安装 O 形密封圈。
- 安装进气温度传感器 (2)。 将进气温度传感器 (2) 上紧到
20 ± 5 N·m (15 ± 4 lb ft) 的扭矩。 - 在进气温度传感器 (2) 上连接线束组件 (1)。
Show/hide table
|
| |
| 图 2 | g01175809 |
注: 检查 O 形密封圈有无磨损或损坏。 如有必要，更换O型密封圈。
Caterpillar Information System:
C-10 Petroleum Engine Turbocharger - Assemble
C-10 Petroleum Engine Turbocharger - Disassemble
C-10 Petroleum Engine Turbocharger - Remove
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Install
C9 Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
XQ60 Rental Generator Set Product Lifting
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
C9 Engine for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
325D and 329D Excavators Hydraulic System Solenoid Valve (Hydraulic Lockout)
C9 Engine for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
C7 PETROLEUM Petroleum Engine Fuel Pressure Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger - Install
C-10 Petroleum Engine Exhaust Manifold - Remove and Install
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
3500 Locomotive Engines Air Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Generator Set Engines Fuel Shutoff
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble