Air Shutoff
Show/hide table
Illustration 1 | g01176050 |
(1) Body
Apply 4C-9614 Silicone Sealant between the body and the cover of the air shutoff prior to assembly.
(2) Capscrew
- Torque ...
7 ± 1 N·m (62 ± 9 lb in)
Lubricate the threads of the capscrew with 4C-5598 High Temperature Anti-Seize prior to assembly.
(3) Capscrew
- Torque ...
9.5 ± 1.5 N·m (84 ± 13 lb in)
Lubricate the threads of the capscrews with 4C-5598 High Temperature Anti-Seize prior to assembly.
(4) Shaft assembly
Lubricate the shaft with 4C-5598 High Temperature Anti-Seize prior to assembly.
The actuation force for the valve must not exceed
Caterpillar Information System:
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C-10 Petroleum Engine Exhaust Manifold - Remove and Install
C-10 Petroleum Engine Turbocharger - Install
C9 Engine for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger - Assemble
C-10 Petroleum Engine Turbocharger - Disassemble
C-10 Petroleum Engine Turbocharger - Remove
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Generator Set Engines Fuel Shutoff
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C-10 Petroleum Engine Inlet Manifold - Install
3500 Engines with EUI Option Turbocharger
2005/07/04 Improved Fuel Cooler {1712}
C15 On-Highway Engine Engine Design
C9 Engine for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Generator Set Sensors and Electrical Components
C9 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve