Turbocharger
Show/hide table
Illustration 1 | g00277601 |
(1) Exhaust manifold
(2) Bolt
-
Apply 5P-3931 Anti-Seize Compound to the threads of the bolt.
- Torque ... 54 ± 5 N·m (40 ± 4 lb ft)
Show/hide table
Illustration 2 | g00787809 |
(3) Bolts
-
Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.
- Torque ... 54 ± 5 N·m (40 ± 4 lb ft)
Show/hide table
Illustration 3 | g01176313 |
(4) Clamp bolt
Use the following procedure to tighten the clamp bolt.
- Tighten the clamp bolt.
Torque ... 14.0 ± 1.5 N·m (10 ± 1 lb ft)
- Gently tap around the clamp bolt with a soft faced hammer.
- Tighten the clamp bolt again.
Torque ... 14.0 ± 1.5 N·m (10 ± 1 lb ft)
(5) Bolt
- Torque ... 40 ± 2 N·m (30 ± 1 lb ft)
Caterpillar Information System:
C-10 Petroleum Engine Inlet Manifold - Install
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
3500 Generator Set Engines Fuel Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Locomotive Engines Air Shutoff
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
2005/07/04 Improved Fuel Cooler {1712}
C15 On-Highway Engine Engine Design
C9 Engine for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Generator Set Sensors and Electrical Components
C9 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve
C280 Marine, Marine Auxiliary, and Petroleum Engines Warranty Information
C13, C15, and C18 Tier 4 Final Engines Fuel Transfer Pump
C9 Engine for Caterpillar Built Machines Alternator - Remove and Install
Cat Commercial Diesel Engine Fluids Recommendations Lubricating Grease
2005/06/20 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
2005/06/01 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}