Engine Design
C15
Show/hide table
图 1 | g01096864 |
气缸和气门的位置 (A) 进气门 (B) 排气门 (C) 发动机飞轮端 |
缸径 ... 137.2 mm (5.40 in)
冲程 ... 171.5 mm (6.75 in)
排量 ... 15.2 L (927.56 cu in)
气缸布置 ... 直列式
每气缸气门数 ... 4
以下数值是进气门间隙的调定值。 ... 0.38 ± 0.08 mm (0.015 ± 0.003 in)
以下数值是进气门间隙的调定值。 ... 0.76 ± 0.08 mm (0.030 ± 0.003 in)
发火次序(喷油顺序) ... 1、5、3、6、2、4
曲轴旋转 ... 逆时针
注: 发动机的前端与飞轮端相对。 发动机的左侧和右侧是指从飞轮端观看发动机时。 1 号气缸是最前端的气缸。
Caterpillar Information System:
2005/07/04 Improved Fuel Cooler {1712}
3500 Engines with EUI Option Turbocharger
C-10 Petroleum Engine Inlet Manifold - Install
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
3500 Generator Set Engines Fuel Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Locomotive Engines Air Shutoff
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
C9 Engine for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Generator Set Sensors and Electrical Components
C9 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve
C280 Marine, Marine Auxiliary, and Petroleum Engines Warranty Information
C13, C15, and C18 Tier 4 Final Engines Fuel Transfer Pump
C9 Engine for Caterpillar Built Machines Alternator - Remove and Install
Cat Commercial Diesel Engine Fluids Recommendations Lubricating Grease
2005/06/20 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
2005/06/01 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
C-10 Petroleum Engine Inlet and Exhaust Valve Springs - Remove and Install
C-10 Petroleum Engine Inlet and Exhaust Valves - Remove and Install