Inlet Manifold - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
 | |
| Illustration 1 | g01176262 |
- Position the O-ring seals and inlet manifold (5) on the exhaust manifold.
- Install bolts (6) and bolts (1) .
- Connect hose assembly (4) to inlet manifold (5) .
- Connect harness assembly (3) and harness assembly (2) .
- Install the air inlet elbow on inlet manifold (5) .
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
3500 Generator Set Engines Fuel Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Locomotive Engines Air Shutoff
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C-10 Petroleum Engine Exhaust Manifold - Remove and Install
3500 Engines with EUI Option Turbocharger
2005/07/04 Improved Fuel Cooler {1712}
C15 On-Highway Engine Engine Design
C9 Engine for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Generator Set Sensors and Electrical Components
C9 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve
C280 Marine, Marine Auxiliary, and Petroleum Engines Warranty Information
C13, C15, and C18 Tier 4 Final Engines Fuel Transfer Pump
C9 Engine for Caterpillar Built Machines Alternator - Remove and Install
Cat Commercial Diesel Engine Fluids Recommendations Lubricating Grease
2005/06/20 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}