Fan Drive - Disassemble
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 1P-0510 | 冲头总成 | 1 |
开始:
- 拆下风扇驱动装置。 请参阅拆解和组装, "风扇驱动装置 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (2) 和垫圈 (3)。
- 将轴组件 (4) 从风扇驱动装置支架 (1) 上拆下。
Show/hide table
图 2 g01176110 Show/hide table图 3 g01274943 - 将螺栓 (5) 和板 (6) 从轴 (9) 上拆下。
- 将轴组件放置到适当的压具中。 如有必要,使用工具 (A) 或适当的压具,将轴 (9) 从挡圈 (8) 和轴承 (7) 上拆下。
Show/hide table
图 1 | g01176090 |
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C-10 Petroleum Engine Exhaust Manifold - Remove and Install
C-10 Petroleum Engine Turbocharger - Install
C9 Engine for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger - Assemble
C-10 Petroleum Engine Turbocharger - Disassemble
C-10 Petroleum Engine Turbocharger - Remove
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Install
C9 Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
XQ60 Rental Generator Set Product Lifting
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove
2005/07/01 Improved Engine Oil Coolers are Now Used {1378}
3500 Locomotive Engines Air Shutoff
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
3500 Generator Set Engines Fuel Shutoff
C9 Engine for Caterpillar Built Machines Fan Drive - Assemble
C9 Engine for Caterpillar Built Machines Fan Drive - Install
C-10 Petroleum Engine Inlet Manifold - Install
3500 Engines with EUI Option Turbocharger
2005/07/04 Improved Fuel Cooler {1712}