Turbocharger Outlet Pressure Sensor - Remove and Install
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
图 1 | g01175712 |
- 从涡轮增压器出口压力传感器 (2) 上断开线束组件 (1)。
- 拆下涡轮增压器出口压力传感器 (2) 和 O 形密封圈。
- 将 O 形密封圈安装到涡轮增压器出口压力传感器 (2) 上。
- 安装涡轮增压器出口压力传感器 (2)。 将涡轮增压器出口压力传感器 (2) 上紧到
10 ± 2 N·m (88 ± 18 lb in) 的扭矩。 - 将线束组件 (1) 连接到涡轮增压器出口压力传感器 (2) 上。
Show/hide table
图 2 | g01175712 |
注: 检查 O 形密封圈有无磨损或损坏。 如有必要,更换O型密封圈。
Caterpillar Information System:
XQ60 Rental Generator Set Product Lifting
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
C9 Engine for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
325D and 329D Excavators Hydraulic System Solenoid Valve (Hydraulic Lockout)
C9 Engine for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
C7 PETROLEUM Petroleum Engine Fuel Pressure Sensor - Remove and Install
C32 Power Module Engine Air Cleaner Element (Dual Element) - Clean/Replace - If Equipped
C9 Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3500 Industrial and Generator Set Engines Air Shutoff - Test
C9 Engine for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
2005/08/29 New Exhaust Bellows Provide Improved Sealing of Exhaust Gas {1059}
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Install
C-10 Petroleum Engine Turbocharger - Remove
C-10 Petroleum Engine Turbocharger - Disassemble
C-10 Petroleum Engine Turbocharger - Assemble
C9 Engine for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Turbocharger - Install
C-10 Petroleum Engine Exhaust Manifold - Remove and Install
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
2005/07/11 Improved Engine Oil Coolers are Now Used {1378}
C-10 Petroleum Engine Inlet Manifold - Remove