Usage:
31Oct2016 |
(Revised 01Nov2016) |
After Failure Only | PRODUCT SUPPORT PROGRAM FOR INSTALLING A FUEL WATER SEPARATOR BLEED SCREW ON CERTAIN WHEEL LOADERS, BACKHOE LOADERS, AND TRACK-TYPE TRACTORS |
|
1262 1263 1260 1261 | PS53334 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53334" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
NOTE: | This Revised Service Letter replaces the 31Oct2016 Service Letter. A change has been made to the Action Required. |
TERMINATION DATE |
31Oct2017 |
PROBLEM
The existing 479-4131 or 479-4133 Primary Fuel Filter can lead to a reduced rate of water drain when the filter element is nearing its end of life. If an unacceptable water drain rate from the fuel/water Separator bowl is observed, a bleed screw adaptor can be installed in the filter base to improve the water drain rate. |
AFFECTED PRODUCT
Model | Identification Number |
416F | HSS00200 |
416F 2 | HWB00150-01015 |
416F ST | KSF00150-02254 |
420F | HST00200-00201 HTG00200 |
420F 2 | HWC00150-01741 |
420F 2 IT | HWD00150-01385 |
420F IT | JWJ00150-03288 |
420F ST | SKR00151-05380, 6996, 45157 |
428F | HTB00200 RAK00150-00610 |
428F 2 | HWN00150-00572 |
430F | HBN00200-00201 HMS00200 |
430F 2 | HWE00150-00325, 327-528 |
430F 2 IT | HWG00150-00234, 236-417 |
430F IT | RGS00150-00376, 378-762 |
430F ST | RDF00150-00332, 334-870 |
432F | HRH00200-00201 PXR00150-00893 |
432F 2 | HWP00150-00936 |
434F | HPS00200 MTR00150-00241 |
434F 2 | HWR00150-00228 |
444F | HCR00200 JXR00150-00346 |
444F 2 | HWS00150-00298, 301-343 |
450F | HJR00150-00202, 204-602 |
918M (T4F HRC) | H2600151-00166 |
924K | PWR00150-00158, 350-4842 |
926M | LTE00100-00104, 150-154, 250-1261, 1900-2806 |
930K | RHN00156-00165, 167-168, 450-4484 |
930M | KTG00130-00134, 170-173, 350-1117, 1600-2201 |
938K | SWL00001, 160-171, 250-4358 |
938M | J3R00140-00146, 190-193, 450-1233, 1700-2901 |
D3K 2 LGP | GAE00160-00187 JPJ00200-00208, 2170-2177 KL200122-00123, 175-206, 208-477, 2120-2369, 2470-2534 KLL00110-01069 |
D3K 2 XL | KF200110, 113-114, 150-263, 2110-2215 KFF00100-00531 |
D4K 2 LGP | KR200140, 142, 175-346, 2140-2265, 2267-2315 KRR00130-00687 |
D4K 2 XL | KM200131, 150-160, 163-169, 171-355, 2130-2249 KMM00120-00707 |
D5K 2 LGP | KY200160-00162, 164, 225-243 KYY00150-01833 RRE00225-00272, 2180, 2188-2207 TRF00171-00335 |
D5K 2 XL | KW200150-00151, 154-155, 200-672, 2150-2241, 2243-2411 KWW00140-01303 |
PARTS NEEDED
Qty |
Part Number | Description |
1 | 4922811 | KIT-BLEED SCREW |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Install 492-2811 Bleed Screw Adaptor into one of the filter base redundant outlet ports, as indicated in Image 1. When installing 492-2811 Bleed Screw Adaptor, install and tighten item 1 to 17Nm and tighten item 2 to 3Nm. |
Image1 |
Image2 |
SERVICE CLAIM ALLOWANCES
0-12 mo |
||||||
13-48 mo |
NOTE: This is a 0.5-hour job | ||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |