Carburetor - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Release six clamps (1). Loosen two rod assemblies (3 ) and remove cover (2) .
Show/hide table
Illustration 1 | g00784053 |
- Remove air filter element (4) .
Show/hide table
Illustration 2 | g00784058 |
- Remove ten locknuts (5) and two bolts (6) .
Show/hide table
Illustration 3 | g00784062 |
Show/hide table
Illustration 4 | g00784064 |
- Remove air cleaner housing (7) .
- Loosen clamp (8). Remove three bolts and washers (9). Remove carburetor (11) with adapter (10) .
- Remove six bolts and washers (12). Separate carburetor (11) from adapter (10). Check the condition of the gasket between the carburetor and the adapter. If the gasket is worn or damaged, use a new part for replacement.
Show/hide table
Illustration 5 | g00784077 |
- Remove indicator (13) from adapter (10) .
Show/hide table
Illustration 6 | g00784084 |
Caterpillar Information System:
3412C Engine Aftercooler
G3408C and G3412C Engines Governor Drive - Assemble
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
G3408C and G3412C Engines Governor Drive - Disassemble
3412C Engine Turbocharger Oil Lines
3412C Engine Turbocharger
C-9 Industrial Engine Fan Drive - Install
3412C Engine Valve Mechanism Cover
G3408C and G3412C Engines Governor Drive - Install
Exhaust Temperature Scanner Worksheet
2001/04/01 New Air Shutoff Groups Are Used {1078}
G3408C and G3412C Engines Carburetor - Install
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Disassemble
3412C Engine Cylinder Block
37-MT, 41-MT, and 42-MT Series Starting Motors Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
3412C Engine Engine Oil Pan
G3408C and G3412C Engines Carburetor - Assemble
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Parallel Operation
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup
3054 and 3056 Marine Generator Sets Warning Alarm
G3408C and G3412C Engines Transformer - Remove and Install
G3408C and G3412C Engines Spark Plugs - Remove and Install