Aftercooler
Show/hide table
 | |
| Illustration 1 | g00784005 |
(1) Plug
(2) Plug
(3) Plug
(4) Plug
(5) Put a thin layer of engine oil or glycerin on the seal bore for the O-rings.
Show/hide table
 | |
| Illustration 2 | g00784085 |
(X) 50.8 mm (2.00 inch) long bolts.
Caterpillar Information System:
G3408C and G3412C Engines Governor Drive - Assemble
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
G3408C and G3412C Engines Governor Drive - Disassemble
3412C Engine Turbocharger Oil Lines
3412C Engine Turbocharger
C-9 Industrial Engine Fan Drive - Install
3412C Engine Valve Mechanism Cover
G3408C and G3412C Engines Governor Drive - Install
Exhaust Temperature Scanner Worksheet
2001/04/01 New Air Shutoff Groups Are Used {1078}
G3408C and G3412C Engines Governor - Remove and Install
G3408C and G3412C Engines Carburetor - Remove
G3408C and G3412C Engines Carburetor - Install
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Disassemble
3412C Engine Cylinder Block
37-MT, 41-MT, and 42-MT Series Starting Motors Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
3412C Engine Engine Oil Pan
G3408C and G3412C Engines Carburetor - Assemble
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Parallel Operation
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup
3054 and 3056 Marine Generator Sets Warning Alarm
G3408C and G3412C Engines Transformer - Remove and Install