Engine Oil Pan
Show/hide table
 | |
| Illustration 1 | g00784300 |
(1) Tighten the plugs to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)
(2) Lubricate the bore lightly with engine oil.
(3) Apply 9S-3263 Thread Lock Compound to plug threads. Tighten the plug to the following torque. ... 80 ± 11 N·m (60 ± 8 lb ft)
Caterpillar Information System:
37-MT, 41-MT, and 42-MT Series Starting Motors Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
3412C Engine Cylinder Block
G3408C and G3412C Engines Carburetor - Disassemble
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Install
G3408C and G3412C Engines Carburetor - Remove
3412C Engine Aftercooler
G3408C and G3412C Engines Governor Drive - Assemble
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
G3408C and G3412C Engines Governor Drive - Disassemble
3412C Engine Turbocharger Oil Lines
G3408C and G3412C Engines Carburetor - Assemble
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Parallel Operation
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup
3054 and 3056 Marine Generator Sets Warning Alarm
G3408C and G3412C Engines Transformer - Remove and Install
G3408C and G3412C Engines Spark Plugs - Remove and Install
G3408C and G3412C Engines Spark Plug Adapter - Remove and Install
3500B Engines Turbocharger
G3300 Engines Speed Sensor - Clean/Inspect
3034 Industrial Engine Maintenance Interval Schedule
Product Identification Numbers (PIN) Location Guide Forwarder
G3408C and G3412C Engines Exhaust Bypass - Remove