Carburetor - Assemble
组装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将气阀 (19) 安装到汽化器本体 (1) 中。 翻转汽化器体 (1) ，然后安装螺钉 (16) 、板 (17) 和膜片 (18) 。
Show/hide table
 | |
| 图 1 | g00784230 |
- 安装轴 (15) 和 O 形密封圈 (14) 。
Show/hide table
 | |
| 图 2 | g00784226 |
- 安装活塞 (13) 、活塞板 (12) 、O 形密封圈 (10) 和螺钉 (11) 。
Show/hide table
 | |
| 图 3 | g00784223 |
- 安装阀 (7) 。 安装螺钉 (6) 和锁紧垫圈。 安装喷嘴 (9) 和 O 形密封圈 (8) 。
Show/hide table
 | |
| 图 4 | g01423413 |
- 安装弹簧 (5) 。
Show/hide table
 | |
| 图 5 | g00784206 |
- 安装盖 (4) 。 安装螺钉 (3) 和锁紧垫圈。
Show/hide table
 | |
| 图 6 | g00784200 |
Show/hide table
 |
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 安装汽化器体 (1) 。 安装螺钉 (2) 和锁紧垫圈。 必要时，安装新密封垫。
Show/hide table
 | |
| 图 7 | g00784147 |
End By: 安装空燃混合器。 请参阅 拆解和组装, "汽化器 - 安装"。
Caterpillar Information System:
3412C Engine Engine Oil Pan
37-MT, 41-MT, and 42-MT Series Starting Motors Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
3412C Engine Cylinder Block
G3408C and G3412C Engines Carburetor - Disassemble
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Install
G3408C and G3412C Engines Carburetor - Remove
3412C Engine Aftercooler
G3408C and G3412C Engines Governor Drive - Assemble
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
G3408C and G3412C Engines Governor Drive - Disassemble
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Parallel Operation
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup
3054 and 3056 Marine Generator Sets Warning Alarm
G3408C and G3412C Engines Transformer - Remove and Install
G3408C and G3412C Engines Spark Plugs - Remove and Install
G3408C and G3412C Engines Spark Plug Adapter - Remove and Install
3500B Engines Turbocharger
G3300 Engines Speed Sensor - Clean/Inspect
3034 Industrial Engine Maintenance Interval Schedule
Product Identification Numbers (PIN) Location Guide Forwarder
G3408C and G3412C Engines Exhaust Bypass - Remove
G3408C and G3412C Engines Exhaust Bypass - Install