Exhaust Bypass - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the gasket on the adapter. Install exhaust bypass valve (3) .
Show/hide table
Illustration 1 | g00784776 |
Show/hide table
Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. |
- Install nuts (4) , the bolts, and the washers.
- Install tube assembly (6) .
- Connect tube assemblies (5) and (8) to tee block (7) . Tighten tube assemblies (5) and (8) .
- Connect hose assembly (1) to exhaust bypass valve (3) . Tighten the upper connection of tube assembly (1) .
Show/hide table
Illustration 2 | g00784770 |
- Connect hose assembly (2) from exhaust bypass valve (3) . Tighten hose assembly (2) .
Caterpillar Information System:
G3408C and G3412C Engines Exhaust Bypass - Remove
Product Identification Numbers (PIN) Location Guide Forwarder
3034 Industrial Engine Maintenance Interval Schedule
G3300 Engines Speed Sensor - Clean/Inspect
3500B Engines Turbocharger
G3408C and G3412C Engines Spark Plug Adapter - Remove and Install
G3408C and G3412C Engines Spark Plugs - Remove and Install
G3408C and G3412C Engines Transformer - Remove and Install
3054 and 3056 Marine Generator Sets Warning Alarm
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Parallel Operation
G3408C and G3412C Engines Carburetor - Assemble
Use Proper Handling During Shipment and Installation of the Water Pumps{1361} Use Proper Handling During Shipment and Installation of the Water Pumps{1361}
G3408C and G3412C Engines Exhaust Bypass - Disassemble
3412C Engine Vibration Damper and Pulley
G3408C and G3412C Engines Exhaust Bypass - Assemble
2001/08/01 A New Pyrometer Is Available {7451, 7466}
Product Identification Numbers (PIN) Location Guide Skid Steer Loader
3412C Engine Fuel Transfer Pump
3412C Engine Fuel Injection Lines
G3408C and G3412C Engines Exhaust Manifold - Remove
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Install
3412C Engine Air Inlet and Exhaust Lines