Skid Steer Loader
Show/hide table
 | |
| Illustration 1 | g00785065 |
Depending on the year/model the PIN Plate (1) is located on the left side of the machine. Or on the back left side of the frame.
The serial number plate (2) for the engine is located on the left side of the engine block.
Caterpillar Information System:
2001/08/01 A New Pyrometer Is Available {7451, 7466}
G3408C and G3412C Engines Exhaust Bypass - Assemble
3412C Engine Vibration Damper and Pulley
G3408C and G3412C Engines Exhaust Bypass - Disassemble
Use Proper Handling During Shipment and Installation of the Water Pumps{1361} Use Proper Handling During Shipment and Installation of the Water Pumps{1361}
G3408C and G3412C Engines Exhaust Bypass - Install
G3408C and G3412C Engines Exhaust Bypass - Remove
Product Identification Numbers (PIN) Location Guide Forwarder
3034 Industrial Engine Maintenance Interval Schedule
G3300 Engines Speed Sensor - Clean/Inspect
3500B Engines Turbocharger
G3408C and G3412C Engines Spark Plug Adapter - Remove and Install
3412C Engine Fuel Transfer Pump
3412C Engine Fuel Injection Lines
G3408C and G3412C Engines Exhaust Manifold - Remove
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Install
3412C Engine Air Inlet and Exhaust Lines
G3408C and G3412C Engines Aftercooler - Remove
3412C Engine Fuel Injection Pump
3412C Engine Fuel Injection Pump Housing
2001/06/01 Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
G3408C and G3412C Engines Aftercooler - Install
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}