Fuel Injection Pump Housing
Show/hide table
Illustration 1 | g00368853 |
(1) The bearing is flush with the edge of the housing. Tolerance ... ± 0.05 mm (± 0.002 inch)
(3) The bearing is installed from the edge of the housing by the following value. ... 0.8 ± 0.5 mm (0.032 ± 0.02 inch)
Show/hide table
Illustration 2 | g00705906 |
For bearings (2) and (3), the bearings' joint clearance must be within 10 ± 1 degrees (6) of the top center.
(5) The distance from the bottom of the housing to the end of the dowel ... 1.60 ± 0.45 mm (0.063 ± 0.0178 inch)
Caterpillar Information System:
3412C Engine Fuel Injection Pump
G3408C and G3412C Engines Aftercooler - Remove
3412C Engine Air Inlet and Exhaust Lines
G3408C and G3412C Engines Exhaust Manifold - Install
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Remove
3412C Engine Fuel Injection Lines
3412C Engine Fuel Transfer Pump
Product Identification Numbers (PIN) Location Guide Skid Steer Loader
2001/08/01 A New Pyrometer Is Available {7451, 7466}
G3408C and G3412C Engines Exhaust Bypass - Assemble
3412C Engine Vibration Damper and Pulley
2001/06/01 Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
G3408C and G3412C Engines Aftercooler - Install
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
G3408C and G3412C Engines Turbocharger - Remove
G3408C and G3412C Engines Turbocharger - Install
3412C Engine Coolant Temperature Sensor
3412C Engine Turbocharger Outlet Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Remove
3412C Engine Engine Oil Pressure Sensor
3412C Engine Atmospheric Pressure Sensor
3412C Engine Fuel Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Install