Engine Oil Cooler - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new gasket (1) on the engine block.
Show/hide table
Illustration 1 | g00785679 |
- Install engine oil cooler (2) with two bolts (3) and two bolts (4) .
- Install engine oil bonnet (9) with three bolts (8). Connect line (5) to the engine oil cooler bonnet.
Show/hide table
Illustration 2 | g00785722 |
- Install detonation sensor (7) in the original position and install two bolts and washers (6) .
- Install fumes disposal tube (11) in the original position and install bolt and washer (10) .
Show/hide table
Illustration 3 | g00785727 |
Caterpillar Information System:
3412C Engine Fuel Pressure Sensor
3412C Engine Atmospheric Pressure Sensor
3412C Engine Engine Oil Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Remove
3412C Engine Turbocharger Outlet Pressure Sensor
3412C Engine Coolant Temperature Sensor
G3408C and G3412C Engines Turbocharger - Install
G3408C and G3412C Engines Turbocharger - Remove
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
G3408C and G3412C Engines Aftercooler - Install
2001/06/01 Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
3412C Engine Fuel Injection Pump Housing
3412C Engine Fuel Temperature Sensor
3412C Engine Speed and Timing Sensor
G3408C and G3412C Engines Timing Gear Cover - Remove and Install
G3408C and G3412C Engines Valve Cover - Remove and Install
Product Identification Numbers (PIN) Location Guide Asphalt Paver
G3408C and G3412C Engines Valve Cover Base - Remove
G3408C and G3412C Engines Valve Cover Base - Install
G3408C and G3412C Engines Rocker Shaft and Push Rod - Remove
3412C Engine Automatic Timing Advance Unit
G3500 Generator Sets Product Description
G3408C and G3412C Engines Rocker Shaft and Push Rod - Install
3412C Engine Engine Support (Front)