Turbocharger - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-3931     | Anti-Seize Compound     | -     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new gasket (14) over studs (15) onto adapter (16) .
Show/hide table
Illustration 1 | g00785577 |
- Apply Tooling (A) to the threads of studs (15) .
- Install turbocharger (12) in the original position. Secure the turbocharger with four nuts (13) . Tighten nuts (13) to a torque of 54 ± 4 N·m (40 ±3 lb ft).
Show/hide table
Illustration 2 | g00785568 |
- Check the condition of all O-ring seals on all water and oil lines. Replace the O-ring seals with new parts. Apply clean oil to all the seals prior to installation.
- Position exhaust elbow (11) and install bolts (10) .
Show/hide table
Illustration 3 | g00785567 |
- Install tube assembly (9) .
- Tighten clamps (8) .
- Install bolts (5) at elbow (4) .
Show/hide table
Illustration 4 | g00785565 |
- Install tube assembly (6) .
- Install tube assembly (7) .
- Install tube assemblies (2) and (3) .
Show/hide table
Illustration 5 | g00785562 |
- Install tube assembly (1) .
Caterpillar Information System:
G3408C and G3412C Engines Turbocharger - Remove
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
G3408C and G3412C Engines Aftercooler - Install
2001/06/01 Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
3412C Engine Fuel Injection Pump Housing
3412C Engine Fuel Injection Pump
G3408C and G3412C Engines Aftercooler - Remove
3412C Engine Air Inlet and Exhaust Lines
G3408C and G3412C Engines Exhaust Manifold - Install
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Remove
3412C Engine Fuel Injection Lines
3412C Engine Coolant Temperature Sensor
3412C Engine Turbocharger Outlet Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Remove
3412C Engine Engine Oil Pressure Sensor
3412C Engine Atmospheric Pressure Sensor
3412C Engine Fuel Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Install
3412C Engine Fuel Temperature Sensor
3412C Engine Speed and Timing Sensor
G3408C and G3412C Engines Timing Gear Cover - Remove and Install
G3408C and G3412C Engines Valve Cover - Remove and Install
Product Identification Numbers (PIN) Location Guide Asphalt Paver