Speed and Timing Sensor
Show/hide table
 | |
| Illustration 1 | g00369893 |
Typical schematic of speed and timing sensor | |
While the engine is stopped, install the sensor. Once the sensor is in contact with the flywheel ring gear, turn the sensor counterclockwise to the following distance. ... 195 ± 15 degrees
(1) Clearance between sensor and flywheel ring gear is 0.61 mm (0.024 inch) to 0.91 mm (0.036 inch)
(2) Install the locknut and tighten the locknut to the following torque. ... 13.5 ± 1 N·m (119 ± 9 lb in)
Caterpillar Information System:
3412C Engine Fuel Temperature Sensor
G3408C and G3412C Engines Engine Oil Cooler - Install
3412C Engine Fuel Pressure Sensor
3412C Engine Atmospheric Pressure Sensor
3412C Engine Engine Oil Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Remove
3412C Engine Turbocharger Outlet Pressure Sensor
3412C Engine Coolant Temperature Sensor
G3408C and G3412C Engines Turbocharger - Install
G3408C and G3412C Engines Turbocharger - Remove
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
G3408C and G3412C Engines Aftercooler - Install
G3408C and G3412C Engines Timing Gear Cover - Remove and Install
G3408C and G3412C Engines Valve Cover - Remove and Install
Product Identification Numbers (PIN) Location Guide Asphalt Paver
G3408C and G3412C Engines Valve Cover Base - Remove
G3408C and G3412C Engines Valve Cover Base - Install
G3408C and G3412C Engines Rocker Shaft and Push Rod - Remove
3412C Engine Automatic Timing Advance Unit
G3500 Generator Sets Product Description
G3408C and G3412C Engines Rocker Shaft and Push Rod - Install
3412C Engine Engine Support (Front)
3412C Engine Engine Oil Cooler
G3408C and G3412C Engines Cylinder Head - Remove