Air Inlet and Exhaust Lines
Show/hide table
Illustration 1 | g00785224 |
(1) Lightly lubricate all the O-ring seals with glycerin or clean engine oil.
(2) Tighten the clamps to the following torque ... 7.5 ± 1.0 N·m (66 ± 9 lb in)
Caterpillar Information System:
G3408C and G3412C Engines Exhaust Manifold - Install
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Remove
3412C Engine Fuel Injection Lines
3412C Engine Fuel Transfer Pump
Product Identification Numbers (PIN) Location Guide Skid Steer Loader
2001/08/01 A New Pyrometer Is Available {7451, 7466}
G3408C and G3412C Engines Exhaust Bypass - Assemble
3412C Engine Vibration Damper and Pulley
G3408C and G3412C Engines Exhaust Bypass - Disassemble
Use Proper Handling During Shipment and Installation of the Water Pumps{1361} Use Proper Handling During Shipment and Installation of the Water Pumps{1361}
G3408C and G3412C Engines Exhaust Bypass - Install
G3408C and G3412C Engines Aftercooler - Remove
3412C Engine Fuel Injection Pump
3412C Engine Fuel Injection Pump Housing
2001/06/01 Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
G3408C and G3412C Engines Aftercooler - Install
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
G3408C and G3412C Engines Turbocharger - Remove
G3408C and G3412C Engines Turbocharger - Install
3412C Engine Coolant Temperature Sensor
3412C Engine Turbocharger Outlet Pressure Sensor
G3408C and G3412C Engines Engine Oil Cooler - Remove
3412C Engine Engine Oil Pressure Sensor