Vibration Damper and Pulley
Show/hide table
 | |
| Illustration 1 | g00784959 |
(1) Vibration damper assembly
(2) Crankshaft pulley
(3) Tighten the bolts to the following torque ... 135 ± 20 N·m (100 ± 15 lb ft)
(4) Lubricate the bolt threads with 4C-5591 Anti-Seize Compound. Tighten the bolts to the following torque ... 215 ± 40 N·m (159 ± 30 lb ft)
Caterpillar Information System:
G3408C and G3412C Engines Exhaust Bypass - Disassemble
Use Proper Handling During Shipment and Installation of the Water Pumps{1361} Use Proper Handling During Shipment and Installation of the Water Pumps{1361}
G3408C and G3412C Engines Exhaust Bypass - Install
G3408C and G3412C Engines Exhaust Bypass - Remove
Product Identification Numbers (PIN) Location Guide Forwarder
3034 Industrial Engine Maintenance Interval Schedule
G3300 Engines Speed Sensor - Clean/Inspect
3500B Engines Turbocharger
G3408C and G3412C Engines Spark Plug Adapter - Remove and Install
G3408C and G3412C Engines Spark Plugs - Remove and Install
G3408C and G3412C Engines Transformer - Remove and Install
3054 and 3056 Marine Generator Sets Warning Alarm
G3408C and G3412C Engines Exhaust Bypass - Assemble
2001/08/01 A New Pyrometer Is Available {7451, 7466}
Product Identification Numbers (PIN) Location Guide Skid Steer Loader
3412C Engine Fuel Transfer Pump
3412C Engine Fuel Injection Lines
G3408C and G3412C Engines Exhaust Manifold - Remove
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Install
3412C Engine Air Inlet and Exhaust Lines
G3408C and G3412C Engines Aftercooler - Remove
3412C Engine Fuel Injection Pump
3412C Engine Fuel Injection Pump Housing