Fuel Transfer Pump
Show/hide table
 | |
| Illustration 1 | g00785100 |
Fuel transfer pump | |
Fuel flow requirements at 575 rpm
- Minimum ... 3.07 L/min (0.81 US gpm)
- Back pressure ... 482 kPa (70 psi)
Bypass pressure at 1742 rpm
- Minimum ... 682 kPa (99 psi)
- Maximum ... 751 kPa (109 psi)
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Skid Steer Loader
2001/08/01 A New Pyrometer Is Available {7451, 7466}
G3408C and G3412C Engines Exhaust Bypass - Assemble
3412C Engine Vibration Damper and Pulley
G3408C and G3412C Engines Exhaust Bypass - Disassemble
Use Proper Handling During Shipment and Installation of the Water Pumps{1361} Use Proper Handling During Shipment and Installation of the Water Pumps{1361}
G3408C and G3412C Engines Exhaust Bypass - Install
G3408C and G3412C Engines Exhaust Bypass - Remove
Product Identification Numbers (PIN) Location Guide Forwarder
3034 Industrial Engine Maintenance Interval Schedule
G3300 Engines Speed Sensor - Clean/Inspect
3500B Engines Turbocharger
3412C Engine Fuel Injection Lines
G3408C and G3412C Engines Exhaust Manifold - Remove
UPS 250 and UPS 300 Uninterruptible Power Supplies Initial Startup Procedure - System Pre-startup
G3408C and G3412C Engines Exhaust Manifold - Install
3412C Engine Air Inlet and Exhaust Lines
G3408C and G3412C Engines Aftercooler - Remove
3412C Engine Fuel Injection Pump
3412C Engine Fuel Injection Pump Housing
2001/06/01 Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
G3408C and G3412C Engines Aftercooler - Install
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803} Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
G3408C and G3412C Engines Turbocharger - Remove