Removal Procedure
Start By:
- Remove the valve cover. Refer to Disassembly and Assembly, "Valve Cover - Remove and Install".
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1) from transformers (2) .
 | |
| Illustration 1 | g00784469 |
- Remove transformers (2) .
Installation Procedure
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Ensure that the transformers are aligned with the harness socket. The transformers should be oriented to the center of the engine.
- Install transformers (2) .
| | |
| Illustration 2 | g00784469 |
- Connect harness assembly (1) to transformers (2) .
End By: Install the valve cover. Refer to Disassembly and Assembly, "Valve Cover - Remove and Install".