Carburetor - Disassemble
拆解步骤
开始:
- 拆下空燃混合器。 请参考拆解和组装, "汽化器 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下六个螺钉 (2) 和锁紧垫圈。 拆下汽化器体 (1) 。
Show/hide table
图 1 | g00784147 |
- 拆下六个螺钉 (3) 和锁紧垫圈。 拆下盖 (4) 。
Show/hide table
图 2 | g00784200 |
Show/hide table
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 拆下弹簧 (5) 。
Show/hide table
图 3 | g00784206 |
- 拆下螺钉 (6) 和锁紧垫圈。 拆下喷嘴 (7) 和 O 形密封圈 (8) 。 检查 O 形密封圈的状况。 如果 O 形密封圈损坏或磨损,则用新零件更换。
Show/hide table
图 4 | g00784211 |
- 拆下气门 (9) 。
Show/hide table
图 5 | g00784219 |
- 拆下螺钉 (11) 、活塞板 (12) 和 O 形密封圈 (10) 。
Show/hide table
图 6 | g00784223 |
- 拆下活塞 (13) 。
- 取下 O 形密封圈 (14) 。 检查 O 形密封圈的状况。 如果 O 形密封圈损坏或磨损,则用新零件更换。
Show/hide table
图 7 | g00784226 |
- 拆下轴 (15) 。
- 翻转汽化器体 (1) ,然后拆下螺钉 (18) 、板 (17) 和膜片 (16) 。
Show/hide table
图 8 | g00784230 |
- 将气阀 (19) 从汽化器体 (1) 上拆下。
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Install
G3408C and G3412C Engines Carburetor - Remove
3412C Engine Aftercooler
G3408C and G3412C Engines Governor Drive - Assemble
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
G3408C and G3412C Engines Governor Drive - Disassemble
3412C Engine Turbocharger Oil Lines
3412C Engine Turbocharger
C-9 Industrial Engine Fan Drive - Install
3412C Engine Valve Mechanism Cover
3412C Engine Cylinder Block
37-MT, 41-MT, and 42-MT Series Starting Motors Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
3412C Engine Engine Oil Pan
G3408C and G3412C Engines Carburetor - Assemble
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Parallel Operation
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup
3054 and 3056 Marine Generator Sets Warning Alarm
G3408C and G3412C Engines Transformer - Remove and Install
G3408C and G3412C Engines Spark Plugs - Remove and Install
G3408C and G3412C Engines Spark Plug Adapter - Remove and Install
3500B Engines Turbocharger
G3300 Engines Speed Sensor - Clean/Inspect