Valve Mechanism Cover
Show/hide table
Illustration 1 | g00783545 |
(X) Rear face of cylinder block
(Y) The breathers are oriented outboard at these locations.
(1) Adapter
Show/hide table
Illustration 2 | g00783547 |
(2) Length of seal in valve cover ... 1409.7 ± 6.4 mm (55.50 ± 0.25 inch)
(3) Tighten the bolts to the following torque. ... 14 ± 4 N·m (10 ± 3 lb ft)
(4) Tighten the bolts to the following torque. ... 14 ± 4 N·m (10 ± 3 lb ft)
(5) Length of seal in valve cover base ... 1625.6 ± 6.4 mm (64.00 ± 0.25 inch)
Caterpillar Information System:
G3408C and G3412C Engines Governor Drive - Install
Exhaust Temperature Scanner Worksheet
2001/04/01 New Air Shutoff Groups Are Used {1078}
G3408C and G3412C Engines Governor - Remove and Install
G3408C and G3412C Engines Governor Drive - Remove
2001/04/01 New Seventeen Character Product Identification Number (PIN) {7557}
G3408C and G3412C Engines Gas Pressure Regulator - Assemble
3412C Engine Fuel Filter Base
C-9 Industrial Engine Fan Drive - Remove
3412C Engine Engine Oil Filter
PM3516 Power Modules Control Panel
PM3516 Power Modules Alarms and Shutoffs
C-9 Industrial Engine Fan Drive - Install
3412C Engine Turbocharger
3412C Engine Turbocharger Oil Lines
G3408C and G3412C Engines Governor Drive - Disassemble
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
G3408C and G3412C Engines Governor Drive - Assemble
3412C Engine Aftercooler
G3408C and G3412C Engines Carburetor - Remove
G3408C and G3412C Engines Carburetor - Install
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Disassemble