Turbocharger Oil Lines
Show/hide table
Illustration 1 | g00783774 |
(1) Apply 5P-3413 Pipe Sealant to the threads of the bolts.
(2) Lubricate the seal bores lightly with glycerin or with clean engine oil.
Caterpillar Information System:
3412C Engine Turbocharger
C-9 Industrial Engine Fan Drive - Install
3412C Engine Valve Mechanism Cover
G3408C and G3412C Engines Governor Drive - Install
Exhaust Temperature Scanner Worksheet
2001/04/01 New Air Shutoff Groups Are Used {1078}
G3408C and G3412C Engines Governor - Remove and Install
G3408C and G3412C Engines Governor Drive - Remove
2001/04/01 New Seventeen Character Product Identification Number (PIN) {7557}
G3408C and G3412C Engines Gas Pressure Regulator - Assemble
3412C Engine Fuel Filter Base
C-9 Industrial Engine Fan Drive - Remove
G3408C and G3412C Engines Governor Drive - Disassemble
3126B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
XQ300, XQ400 Rental Generator Sets Self-Diagnostics
G3408C and G3412C Engines Governor Drive - Assemble
3412C Engine Aftercooler
G3408C and G3412C Engines Carburetor - Remove
G3408C and G3412C Engines Carburetor - Install
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
G3408C and G3412C Engines Carburetor - Disassemble
3412C Engine Cylinder Block
37-MT, 41-MT, and 42-MT Series Starting Motors Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
3412C Engine Engine Oil Pan