A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
- Engine: Commercial
- 3500 and 3500B Family All
- G3500 Family All
The new kit includes the pressure cap, a warning film, and instructions for installation of the film. The contents of the kit are listed in Table 1.
Show/hide table
Contents of the 294-9052 Radiator Cap Kit     | |
Qty     | Item     |
1     | 4N-3311 Pressure Cap     |
1     | 225-4256 Film     |
1     | Special Instruction, REHS3001, "Installation of the 225-4256 Film"     |
Show/hide table
Illustration 1 | g01235683 |
225-4256 Film |
Show/hide table
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. |
Install the 225-4256 Film on a flat surface of the radiator or on the expansion tank near the cap. Make sure that the film will not be obstructed by any object.
When you replace a 4N-3311 Pressure Cap, use the 294-9052 Radiator Cap Kit.
Caterpillar Information System:
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Disassemble
C15 On-Highway Engine Clean Gas Induction Valve - Install
C15 On-Highway Engine Clean Gas Induction Valve - Remove
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Remove
3512C Engine for Caterpillar Built Machines Electrical Connectors and Functions
C15 On-Highway Engine Water Pump - Remove
C15 On-Highway Engine Water Pump - Install
3512C Petroleum Engines Analog Sensor (Passive)
C15 On-Highway Engine Water Temperature Regulator Housing - Remove and Install
C175-16 and C175-20 Generator Set Engines Finding the Top Center Position for the No. 1 Piston
C15 On-Highway Engine Engine Oil Filter Base - Remove
C15 On-Highway Engine Engine Oil Filter Base - Install
G3500 Engines Flywheel
C175-16 Locomotive Engine Valve Lash - Adjust
3500B Generator Sets Emergency Stopping
C15 On-Highway Engine Valve Mechanism Cover - Remove and Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Transfer Gears - Remove - Idler