Relief Valve (Transmission Lubrication) - Install
安装步骤
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上，从而可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏，则应使用新件进行更换。
- 安装安全阀 (1) 和螺栓 (2) 。
Show/hide table
 | |
| 图 1 | g01288304 |
- 向变速箱里注油。
Caterpillar Information System:
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Remove
3512C Engine for Caterpillar Built Machines Electrical Connectors and Functions
C15 On-Highway Engine Precooler - Install
C15 On-Highway Engine Precooler - Remove
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Stick
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Lockup Clutch and Solenoid Valve (Torque Converter) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
C15 On-Highway Engine Clean Gas Induction Valve - Remove
C15 On-Highway Engine Clean Gas Induction Valve - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
C15 On-Highway Engine Water Pump - Remove
C15 On-Highway Engine Water Pump - Install