Relief Valve (Transmission Lubrication) - Assemble
组装步骤
Show/hide table
需要的工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | -     | 螺杆 3/8" - 16 NC × 6"     |
2     |
8T-4896 | 硬垫圈     | 2     | |
9S-8752 | 全高螺母     | 2     |
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上,从而可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新件进行更换。
- 将盖 (16) 、螺栓 (15) 、盖 (14) 和螺栓 (13) 安装到阀体 (4) 上。
Show/hide table
图 1 | g01288395 |
- 将挺升阀 (9) 、弹簧 (10) 、护圈 (11) 和挡圈 (12) 安装在滑阀组件 (6) 中。
Show/hide table
图 2 | g01288393 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将滑阀组件 (6) 、隔套 (7) 和弹簧 (8) 安装到阀体 (4) 中。
Show/hide table
图 3 | g01288384 |
Show/hide table
图 4 | g01288382 |
Show/hide table
图 5 | g01288380 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 使用 (A) ,将盖 (2) 和 O 形密封圈 (5) 抵在阀体 (4) 上安装。
- 卸下一套工具 (A) ,安装螺栓 (1) 。
- 再卸下一套工具 (A) ,安装螺栓 (3) 。
End By: 安装变速箱润滑安全阀。 请参阅 解体和组装, "变速箱润滑安全阀 - 安装"。
Caterpillar Information System:
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Disassemble
C15 On-Highway Engine Clean Gas Induction Valve - Install
C15 On-Highway Engine Clean Gas Induction Valve - Remove
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Remove
3512C Engine for Caterpillar Built Machines Electrical Connectors and Functions
C15 On-Highway Engine Precooler - Install
C15 On-Highway Engine Precooler - Remove
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Stick
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
C15 On-Highway Engine Water Pump - Remove
C15 On-Highway Engine Water Pump - Install
3512C Petroleum Engines Analog Sensor (Passive)
C15 On-Highway Engine Water Temperature Regulator Housing - Remove and Install
C175-16 and C175-20 Generator Set Engines Finding the Top Center Position for the No. 1 Piston
C15 On-Highway Engine Engine Oil Filter Base - Remove
C15 On-Highway Engine Engine Oil Filter Base - Install