Precooler - Remove
Removal Procedure
Start By:
- Remove the clean gas induction valve. Refer to Disassembly and Assembly, "Clean Gas Induction Valve - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
- Disconnect hose (1) and hose (2) from precooler (3) .
Show/hide table
Illustration 1 | g01288195 |
- Disconnect hoses (4) from precooler (3) .
Show/hide table
Illustration 2 | g01288255 |
- Loosen clamp (5). Remove tube (6) .
Show/hide table
Illustration 3 | g01288267 |
Show/hide table
Illustration 4 | g01288286 |
- Disconnect clamp (7) .
Show/hide table
Illustration 5 | g01288272 |
- Remove bolts (8). Remove precooler (3) and elbow (9) .
Show/hide table
Illustration 6 | g01288276 |
- Disconnect clamp (10). Remove elbow (9) from precooler (3) .
Show/hide table
Illustration 7 | g01288278 |
Caterpillar Information System:
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Stick
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Lockup Clutch and Solenoid Valve (Torque Converter) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
C15 On-Highway Engine Turbocharger - Install - Low Pressure
C15 On-Highway Engine Turbocharger - Remove - Low Pressure
3606 and 3608 Engines Air Inlet Shutoff - Remove and Install
3512C Engine for Caterpillar Built Machines Speed Control
C15 On-Highway Engine Precooler - Install
3512C Engine for Caterpillar Built Machines Electrical Connectors and Functions
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Install
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
C15 On-Highway Engine Clean Gas Induction Valve - Remove
C15 On-Highway Engine Clean Gas Induction Valve - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)