Relief Valve (Transmission Lubrication) - Disassemble
解体步骤
Show/hide table
需要的工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | -     | 螺杆 3/8" - 16 NC × 6"     |
2     |
8T-4896 | 硬垫圈     | 2     | |
9S-8752 | 全高螺母     | 2     |
开始:
- 卸下变速箱润滑安全阀。 请参阅解体和组装, "变速箱润滑安全阀 - 拆卸"。
注: 清洁度是一项重要的因素。 解体步骤开始之前,应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
- 卸下螺栓 (1) ,安装一套工具 (A) 。
Show/hide table
图 1 | g01288380 |
Show/hide table
图 2 | g01288382 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 卸下螺栓 (3) ,再安装一套工具 (A) 。
- 使用工具 (A) ,小心地释放盖 (2) 上的弹簧压力。
- 从阀体 (4) 上卸下盖 (2) 、O 形密封圈 (5) 、弹簧 (8) 和隔套 (7) 和滑阀组件 (6) 。
Show/hide table
图 3 | g01288384 |
- 从滑阀组件 (6) 上卸下挡圈 (12) 、护圈 (11) 、弹簧 (10) 和提升阀 (9) 。
Show/hide table
图 4 | g01288393 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 从阀体 (4) 上卸下螺栓 (13) 、盖 (14) 、螺栓 (15) 和盖 (16) 。
Show/hide table
图 5 | g01288395 |
Caterpillar Information System:
C15 On-Highway Engine Clean Gas Induction Valve - Install
C15 On-Highway Engine Clean Gas Induction Valve - Remove
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Remove
3512C Engine for Caterpillar Built Machines Electrical Connectors and Functions
C15 On-Highway Engine Precooler - Install
C15 On-Highway Engine Precooler - Remove
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Stick
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Torque Converter Inlet) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
C15 On-Highway Engine Water Pump - Remove
C15 On-Highway Engine Water Pump - Install
3512C Petroleum Engines Analog Sensor (Passive)
C15 On-Highway Engine Water Temperature Regulator Housing - Remove and Install
C175-16 and C175-20 Generator Set Engines Finding the Top Center Position for the No. 1 Piston
C15 On-Highway Engine Engine Oil Filter Base - Remove