Water Pump - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-6396     | O-Ring Assembly Compound     | -     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Apply Tooling (A) onto O-ring seal (15). Install O-ring seal (15) onto water pump (13) .
Show/hide table
Illustration 1 | g01288803 |
- Position water pump (13) onto front housing (14) .
Show/hide table
Illustration 2 | g01288797 |
- Tighten bolts (12) .
- Install elbow (11). Install bolts (10). Connect hose (9) .
Show/hide table
Illustration 3 | g01288725 |
- Install elbow (8). Install the stud and nut (6). Install bolt (4). Connect tube assembly (7). Connect tube assembly (5). Connect hose (3) .
Show/hide table
Illustration 4 | g01288715 |
- Install bracket (2). Install elbow (1) .
Show/hide table
Illustration 5 | g01288692 |
End By:
- Install the clean gas induction cooler. Refer to Disassembly and Assembly, "Clean Gas Induction Cooler - Remove and Install".
- Install the water temperature regulator housing. Refer to Disassembly and Assembly, "Water Temperature Regulator Housing - Install".
Caterpillar Information System:
C15 On-Highway Engine Water Pump - Remove
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Disassemble
C15 On-Highway Engine Clean Gas Induction Valve - Install
C15 On-Highway Engine Clean Gas Induction Valve - Remove
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Install
3512C Petroleum Engines Analog Sensor (Passive)
C15 On-Highway Engine Water Temperature Regulator Housing - Remove and Install
C175-16 and C175-20 Generator Set Engines Finding the Top Center Position for the No. 1 Piston
C15 On-Highway Engine Engine Oil Filter Base - Remove
C15 On-Highway Engine Engine Oil Filter Base - Install
G3500 Engines Flywheel
C175-16 Locomotive Engine Valve Lash - Adjust
3500B Generator Sets Emergency Stopping
C15 On-Highway Engine Valve Mechanism Cover - Remove and Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Transfer Gears - Remove - Idler
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Transfer Gears - Install - Idler
2006/07/01 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}