Control Manifold - Install
安装步骤
Show/hide table
需要的工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 1U-8846     | 密封垫密封胶     | 1     |
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上,从而可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新件进行更换。
- 将工具 (A) 涂敷在歧管 (3) 的配合面上。
Show/hide table
图 1 | g01288587 |
- 安装歧管 (3) 和螺栓 (2) 。
- 连接软管组件 (4) 和线束组件 (1) 。
End By:
- 安装变矩器进口安全阀。 请参阅 解体和组装, "变距器进口安全阀 - 安装"。
- 安装变矩器锁止离合器和电磁阀。 请参阅 解体和组装, "变矩器锁止离合器和电磁阀 - 安装"。
Caterpillar Information System:
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Control Manifold - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Disassemble
C15 On-Highway Engine Clean Gas Induction Valve - Install
C15 On-Highway Engine Clean Gas Induction Valve - Remove
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Relief Valve (Transmission Lubrication) - Remove
3512C Engine for Caterpillar Built Machines Electrical Connectors and Functions
C15 On-Highway Engine Precooler - Install
C15 On-Highway Engine Precooler - Remove
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Stick
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
C15 On-Highway Engine Water Pump - Remove
C15 On-Highway Engine Water Pump - Install
3512C Petroleum Engines Analog Sensor (Passive)
C15 On-Highway Engine Water Temperature Regulator Housing - Remove and Install
C175-16 and C175-20 Generator Set Engines Finding the Top Center Position for the No. 1 Piston
C15 On-Highway Engine Engine Oil Filter Base - Remove
C15 On-Highway Engine Engine Oil Filter Base - Install
G3500 Engines Flywheel
C175-16 Locomotive Engine Valve Lash - Adjust