Oil Filter and Base (Torque Converter) - Install
Note: Inspect the O-ring seals. Replace any O-ring seals that are worn or damaged.
Note: Prior to installation, lubricate the O-ring seals with the fluid that is being sealed.
Show/hide table
Illustration 1 | g00510364 |
- Use a suitable lifting device to support the weight of torque converter oil filter (1). The weight of the torque converter oil filter (1) is
27 kg (59.5 lb) . - Install torque converter oil filter (1), four washers, and four bolts (2).
- Install bypass switch (3) of the torque converter oil filter.
- Install O-ring seal (6). Connect hose assembly (7). Install split flange (5), four washers, and four bolts (4).
- Repeat Step 4 for remaining hose assembly (8).
- Fill the oil. Refer to Operation and Maintenance Manual for the correct filling procedure and for the fluid capacities.
Caterpillar Information System:
D350E Series II Articulated Truck Accumulator (Suspension) - Remove and Install
D350E Series II Articulated Truck Fender - Remove and Install
RM-350 and SM-350 Road Reclaimer/Soil Stabilizers Machine Electronic Control System Speed Sensor - Adjust
D350E Series II Articulated Truck Parking Brake - Install
RM-350 and SM-350 Road Reclaimer/Soil Stabilizers Machine Electronic Control System Glossary of Electrical Terms
D350E Series II Articulated Truck Service Brake - Install
D350E Series II Articulated Truck Service Brake - Assemble
D350E Series II Articulated Truck Service Brake - Disassemble
D350E Series II Articulated Truck Pressure Reducing Valve (Hoist Pilot Pressure) - Remove and Install
TH103 Telehandler Maintenance Interval Schedule
D350E Series II Articulated Truck Hoist Control Valve - Install
RM-350 and SM-350 Road Reclaimer/Soil Stabilizers Machine Electronic Control System System Schematic
RM-350 and SM-350 Road Reclaimer/Soil Stabilizers Machine Electronic Control System CID 060 FMI F00 Electrical System Voltage Value Too High - Test
D350E Series II Articulated Truck Center Suspension Frame - Install
D350E Series II Articulated Truck Rear Suspension Frame - Install
65E, 75E, 85E and 95E Agricultural Tractors Hydraulic Oil Filter (Return) and Base - Remove and Install
D350E Series II Articulated Truck Front Frame and Rear Frame - Separate
65E, 75E, 85E and 95E Agricultural Tractors Steering Oil Filter and Base - Remove and Install
D350E Series II Articulated Truck Oscillating Hitch - Remove
D350E Series II Articulated Truck Oscillating Hitch - Install
793C Off-Highway Truck Power Train Screen (Torque Converter) - Remove
D350E Series II Articulated Truck Fuel Tank - Install
789C Off-Highway Truck Machine Systems Center Arm (Steering) - Remove and Install
789C Off-Highway Truck Machine Systems Steering Arm - Remove and Install