1994/11/14 Caterpillar


Correct Hydraulic Tank Breather Must Be Used To Prevent Oil Loss{5056}

Usage:


D20D (9MG),
D250D (6NG) Articulated Trucks

If a 2U-7441 Breather, part of the 7U-9222 Hydraulic Tank Group, is not used on the D20D and D250D Articulated Trucks, hydraulic oil will be lost through the breather when the body is being lowered. The 2U-7441 Breather requires 15 kpa (2 psi) to open the breather.

If a 7U-7613 Breather, which requires no pressure to open, is used instead of a 2U-7441 Breather, oil will spill from the breather when the body is being lowered.

Caterpillar Information System:

1994/11/14 Hydraulic System Instability In The Hoist Second Stage Can Be Eliminated{5051,5057}
1994/11/14 New Precleaner Base Provides Better Seal Around Air Filter Inlet Port{1050}
1994/11/14 New Stronger Muffler Assembly Available For Part Service{1062}
1994/11/07 New Stiffer Tube Assembly Used In Air Compressor Lines Group{1803,1380}
1994/11/07 Two New Manifold Sections Used In Upper Water Lines Group{1380}
1994/10/31 New Arm Assembly Used In Belt Tightener Groups{1358}
1994/10/31 Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31 New Piston Crown Assembly Used In Piston Group{1214}
1994/10/31 Using The Correct Air Conditioner Compressor Oil{1802,7320}
1994/10/31 New Instrument Panel Groups With Improved Light Bulb Retention Can Be Installed{7451}
1994/10/31 Wear Limits For Steering Linkage Ball Studs {4329,4318,4305}
1994/10/24 Automatic Ether Starting Aid Systems And Engines Equipped With Electronic Unit Injection (EUI){1456}
1994/11/14 New 24 Volt Halogen Lamp Groups And Lamp Guards Available{1429}
1994/11/21 New Oil Cooler Group{1374}
1994/11/21 New Air Dryer Check Valve Assembly Used{4285}
1994/11/21 New Bearing Housing Used In Turbocharger Group{1056,1052}
1994/11/21 Improved Bracket In Turbocharger Support Group Provides Improved Access To Exhaust Bypass Group (Wastegate){1073,1057}
1994/11/21 New Tank (Oil Saver) Used In Rear Axle Assembly{3260}
1994/11/21 Wheel Bearing Check And Adjustment Maintenance Interval {4208}
1994/11/21 New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21 3054 And 3056 Machine Engine Fuel Injection Pump Service{1251}
1994/11/28 Fixture Can Be Used To Simplify Challenger Radiator Support Installation.{1353}
1994/11/28 Radiator Mounting Bolt Damage{1353}
1994/11/28 New Front Axle Shims Make Adjustment Easier{3250}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.