New Front Axle Shims Make Adjustment Easier{3250}
Usage:
Challenger 65C (2ZJ500-Up),
Challenger 70C (2YL1-Up),
Challenger 75C (4KK500-Up),
Challenger 85C (9TK1-Up) Agricultural Tractors
A new front axle shim is available for field alignment or installation of new belts. When the new "split design" shim is used, it is not necessary to completely disassemble the front idler, belt, or bearings. See the chart for shim identification.
Caterpillar Information System:
1994/11/28 Radiator Mounting Bolt Damage{1353}
1994/11/28 Fixture Can Be Used To Simplify Challenger Radiator Support Installation.{1353}
1994/11/21 3054 And 3056 Machine Engine Fuel Injection Pump Service{1251}
1994/11/21 New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21 Wheel Bearing Check And Adjustment Maintenance Interval {4208}
1994/11/21 New Tank (Oil Saver) Used In Rear Axle Assembly{3260}
1994/11/21 Improved Bracket In Turbocharger Support Group Provides Improved Access To Exhaust Bypass Group (Wastegate){1073,1057}
1994/11/21 New Bearing Housing Used In Turbocharger Group{1056,1052}
1994/11/21 New Air Dryer Check Valve Assembly Used{4285}
1994/11/21 New Oil Cooler Group{1374}
1994/11/14 New 24 Volt Halogen Lamp Groups And Lamp Guards Available{1429}
1994/11/14 Correct Hydraulic Tank Breather Must Be Used To Prevent Oil Loss{5056}
1994/11/28 Screened Filter For Implement Motor Case Drain Return Line{5720,4351,4921}
1994/11/28 Improved Spring Used In Belt Tightener Groups{1358}
1994/11/28 Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/05 New Differential Group Housing Used In The Output Gear Group{3159}
1994/12/05 New Muffler Bracket Improves Muffler Support{1062}
1994/12/05 Hardened Spacers Used In Steer Pivot{4300,7051,7066}
1994/12/05 Flexible Hose Assembly Replaces Tube Assemblies In Turbocharger Water Lines Groups{1380}
1994/12/05 Dry Start Priming Procedure for 3500 Machine Engines with Electronic Unit Injection (EUI){1250,1258}
1994/12/12 Procedure For Measuring Oscillating Hitch Wear {7113,7114}
1994/12/12 Procedure To Bleed And Charge The Rear Suspension{7213}
1994/12/12 Caterpillar Hose Press And Tool Usage{5057,0684}
1994/12/12 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}