Improved Data Logger Feature For Customer Communication Module{1926}
Usage:
All Generator Set Engines Equipped With a Customer Communication Module and (CCM)-PC Software
The data logger feature in Version 1.2 of the CCM-PC software will not log data unless a button in the "Rate Per" box is selected. When the data logger starts, the "Hour" button is shown as selected but the program code has not initialized the timer rate value. By selecting the "Hour" or "Minute" button the timer rate is initialized. A permanent fix will be incorporated into the next release of software.
Caterpillar Information System:
1999/04/01 New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450}
1999/04/01 Protection From Paint Is Required For The G3600 Hydraulic Actuator (Hydrax) Shaft{1909,7581}
1999/04/01 New Cover And Plate Assembly Used In Oil Level Contactor Groups To Help Resist Vibration Damage{1326,7450}
1999/04/01 Heinzmann Wastegate Actuator Relocated{1057}
1999/04/01 Using The Correct Diode When Using The Customer Communication Module In Multiple Engine Applications{1902,0374}
1999/04/01 Be Sure To Use The Correct Gas Fuel Pressure{1250,1270,1293}
1999/04/01 New Exhaust Manifold Group Seals Provides Improved Exhaust Gas Sealing{1059}
1999/04/01 Re-Alignment Warning Tag On All 3500 Generator Sets Reminds Of Alignment Required At Installation{1021}
1999/04/01 New Oil Pump Group Used{1304}
1999/04/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/04/01 New Fuel Shutoff Solenoids With Improved Durability Available{1259}
1999/04/01 Use 157-3716 (Exhaust) And 157-3717 (Intake) Valve Seat Drivers To Install Valve Seats In Engines With Unfinished Valve Guides{1103,0703}
1999/04/01 Special Instruction, REHS0345-01, "Generator Service Literature Index" Is Available{4450}
1999/04/01 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming and Spare Fault Operation{4490}
1999/04/01 New Control Panel Films Show That SR4B Generators Are Not To Be Wired In The Delta Configuration{7557,7566}
1999/05/01 Use 157-3722 Driver To Remove And Install Engine Valve Guides{0703,1104}
1999/05/01 Cold Start Advance Solenoid Available{1272,1250}
1999/05/01 New Design Of Cylinder Block And Main Bearings{1201,1203,1224}
1999/05/01 New Block Cover Used{1201}
1999/05/01 New Stainless Steel Filler Neck Now Used In Radiator Groups{1353}
1999/05/01 Use 125-5597 Mounting Bar To Disassemble And Assemble Heat Exchanger{1379}
1999/05/01 New Breakout Harness{1559}
1999/05/01 New Turbocharger Supports Help Prevent Watercooled Exhaust Manifold Cracking{1059,1052}
1999/05/01 New Basic Cylinder Head Group Used In 3500B High Speed Commercial Engines{1100,1103,1105}