1999/05/01 Caterpillar

Use 125-5597 Mounting Bar To Disassemble And Assemble Heat Exchanger{1379}

Usage:

3406E (9WR) Marine Engines

Warranty Category: G

Features/Benefits

* Used to hold heat exchanger plates in alignment during disassembly and assembly.

* Makes repair work faster and easier.

Specifications/Technical Information

Hex End - 3/4 inch

Outside diameter - 29.75 mm (1.71 in)

Threaded end - 1/2-13

Caterpillar Information System:

1999/05/01 New Stainless Steel Filler Neck Now Used In Radiator Groups{1353}

1999/05/01 New Block Cover Used{1201}

1999/05/01 New Design Of Cylinder Block And Main Bearings{1201,1203,1224}

1999/05/01 Cold Start Advance Solenoid Available{1272,1250}

1999/05/01 Use 157-3722 Driver To Remove And Install Engine Valve Guides{0703,1104}

1999/04/01 New Control Panel Films Show That SR4B Generators Are Not To Be Wired In The Delta Configuration{7557,7566}

1999/04/01 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming and Spare Fault Operation{4490}

1999/04/01 Special Instruction, REHS0345-01, "Generator Service Literature Index" Is Available{4450}

1999/04/01 Improved Data Logger Feature For Customer Communication Module{1926}

1999/04/01 New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450}

1999/04/01 Protection From Paint Is Required For The G3600 Hydraulic Actuator (Hydrax) Shaft{1909,7581}

1999/04/01 New Cover And Plate Assembly Used In Oil Level Contactor Groups To Help Resist Vibration Damage{1326,7450}

1999/05/01 New Breakout Harness{1559}

1999/05/01 New Turbocharger Supports Help Prevent Watercooled Exhaust Manifold Cracking{1059,1052}

1999/05/01 New Basic Cylinder Head Group Used In 3500B High Speed Commercial Engines{1100,1103,1105}

1999/05/01 New Flywheel Housing Assembly Available{1157}

1999/05/01 Changes To High Pressure Gas Regulator Assembly Provide Improved Response{1270,1283}

1999/05/01 New High Pressure Air/Fuel Ratio Control (AFRC) Actuator Available For Operations In Wet Locations {1278}

1999/05/01 New Service Tool And Procedure To Test Detonation Sensor For Proper Performance{1559}

1999/05/01 Updates Available To Eliminate False Detonation And "No Magneto Interface" Nuisance Shutdowns{1900,1901}

1999/05/01 New Carbon Monoxide (CO) Emission Levels For Natural Gas Engine Applications{0376}

1999/05/01 New Manifolds Used In Exhaust Manifold Group{1059}

1999/05/01 New Silencer For 3600 Diesel Engines{1087}

1999/05/01 Center The Rocker Arm Shaft Assembly During Installation Of The Valve Rocker Arm Group{1102,1112,1121,1123,1208,1209}