C175-16 and C175-20 Engines for Off-Highway Trucks Caterpillar


Exhaust Manifold

Usage:

797F LAJ



图 1g01455986

注: 组装之前,将 4C-5599 防粘结剂 涂抹在卡箍 (1) 的螺纹和夹紧面上。

(1) 八个卡箍的扭矩 ... 12 ± 2 N·m (105 ± 18 lb in)

(2) 组装在歧管和涡轮增压器之间的波纹管的回旋间隙 ... 1.3 mm (0.05 in)

(3) 组装后,将密封垫的定位舌弯曲至邻近的表面。

注: 组装之前,将 4C-5599 防粘结剂 涂敷在隔套 (4) 和螺栓 (5) 的螺纹上。

(5) 八个螺栓的扭矩 ... 65 ± 5 N·m (48 ± 4 lb ft)

Caterpillar Information System:

330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Grease Lines
C175-16 Locomotive Engine Exhaust Fitting
G3500B Engines Engine Sensors
G3500B Engines Electronic Control System Parameters
390F MHPU Mobile Hydraulic Power Unit Alternate Exit
G3500B Engines Electronic Control Module (ECM)
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562} Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
TH48-E70 Petroleum Transmission Transmission Warm-up
G3500B Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547} Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547}
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Install
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear)
3512B Engine Product Lifting
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Operator Console - Remove and Install
3512B Engine Engine Crankcase Breather - Clean
2008/12/08 A New Cat Compression Brake Is Available. {1119, 1129}
3000 Frame SR5 Electric Power Generation Exciter - Remove and Install
3000 Frame SR5 Electric Power Generation Bearing - Remove and Install - Rear Bearing - Remove and Install
3000 Frame SR5 Electric Power Generation Bus Bar - Remove and Install
3000 Frame SR5 Electric Power Generation Rotor - Remove and Install
G3500B Engines Engine Monitoring System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.